Varför larm? Inbrottsstatistik Produkter Webbplatser Installatörer
JA-60 Comfort
JA-63 Profi
JA-65 Maestro
JA-80 Oasis

   

The JA-65 is a fully programmable control panel with building block architecture. This allows the JA-65 to be tailored to particular installation requirements. The Maestro can operate as a wireless, wire operated or combined system. It can work with 16 wireless detectors and can have 8 or 16 hard wire zone inputs. An additional JA-60 or JA-65 subsystem control panel can expand the system. The control panel can be split in to 2 independent sections with a shared common area. The control panel processes data from all

system parts and also checks their readiness. It supervises the performance of the system’s radio communication to check for jamming. It also monitors the status of the power sources as well as all anti-tampering sensors.
   Programming of the system is possible via the keypad(s) or from a connected PC. The built in telephone dialer can communicate with a Monitoring Station or remote PC, send voice messages and dial a numeric Pager.

The JA-65 is designed with building-block architecture and is supplied in modules so that you can build a control panel, according to your needs. Available modules are:

  • JA-65K - main board with power supply in a metal box (no inputs)
  • JA-65H - module of 8 hard wired zones (max. 2 per unit)
  • JA-65R - 16 zone radio module (receiver and transmitter)
  • JA-65X - combined digital/voice dialer module

   For a hybrid system use all modules (with one module JA-65H you have 8 wired zones, with 2 modules – 16 wired zones). If you need only 8 hard wired zones with a communicator, you buy JA-65K + JA-65H + JA-65X. Combination of JA-65K + JA-65R + JA-65X gives you a pure wireless control panel.
   For the easiest setting and supervision of the system, we recommend using the PC-60B interface along with Comlink software.
JA-65 Maestro

 

Under Construction.....

 

   The JA-65 is a fully programmable control panel with building block architecture. This allows the JA-65 to be tailored to particular installation requirements. The Maestro can operate as a wireless, wire operated or combined system. It can work with 16 wireless detectors and can have 8 or 16 hard wire zone inputs. An additional JA-60 or JA-65 subsystem control panel can expand the system. The control panel can be split in to 2 independent sections with a shared common area. The control panel processes data from all

system parts and also checks their readiness. It supervises the performance of the system’s radio communication to check for jamming. It also monitors the status of the power sources as well as all anti-tampering sensors.
   Programming of the system is possible via the keypad(s) or from a connected PC. The built in telephone dialer can communicate with a Monitoring Station or remote PC, send voice messages and dial a numeric Pager.

The JA-65 is designed with building-block architecture and is supplied in modules so that you can build a control panel, according to your needs. Available modules are:

   For a hybrid system use all modules (with one module JA-65H you have 8 wired zones, with 2 modules – 16 wired zones). If you need only 8 hard wired zones with a communicator, you buy JA-65K + JA-65H + JA-65X. Combination of JA-65K + JA-65R + JA-65X gives you a pure wireless control panel.
   For the easiest setting and supervision of the system, we recommend using the PC-60B interface along with Comlink software.